18
Ice level light
on.
Ice maker is full of ice normally.
Remove ice.
Dash plate is blocked by ice and can not
reset.
Automatically reset after the ice melts.
Ice full on display when the ice
basket is with little ice.
Open the door and take out the ice in
blockage.
Hall device, connector or components
are loose.
Connect the wire on the control board to
the evaporator.
Hall device breakdown.
Change the Hall device.
Breakdown of magnetic valve.
Change the dash plate.
Fault light on.
Not making ice.
Magnetic valve malfunction.
Change the ice dropping magne.
Breakdown of compressor.
Change the compressor.
Breakdown of pump.
Change the pump.
Breakdown of sensor, Hall device
condensor sensor water level sensor.
Change the sensor.
Ice full, water
shortage and
breakdown
lights all on.
Overheating of the cooling system when
the fan malfunctions.
Change the condensor fan.
Makes ice
normally but
cannot drop it.
Breakdown of the magnetic valve.
Change the ice dropping magnetic valve.
Low ambient temperature,
below 50°F/10°C.
Locate the unit per installation
instructions.
The machine
functions
normally but the
ice has obvious
holes.
Scale or impurities in water circulation
system or spray pipe or pump.
Clean the pipeline.
