PULSE 2.0 User Manual
7
Step 4: Connect the attachment connectors on each attachment to the junction box air outlets. The attachment connectors
can only be connected to the junction box in the correct orientation. Insert the attachment connectors firmly into the junction
box air outlets until you hear an audible “click.”
If only one attachment will be connected to the junction box, use the blocking plug located on the underside of the
junction box to block off the unused junction box air outlet. Press firmly to make sure the blocking plug is fully seated.
Step 5: Press the power button on the PULSE 2.0 device firmly for one second to turn on the system. While the device is on,
the green LED next to the power button will be lit up.
ADJUST THE INTENSITY
Adjust the intensity level of the session by pressing the level adjustment buttons on the left and right of the level indicator.
Intensity level 1 is the gentlest setting. The massage becomes stronger as the intensity level is increased.
Intensity can be adjusted while the session is running. When level is adjusted during a session, the system will stop for 10
seconds, and the cycle will resume at the new pressure.
ADJUST THE SESSION TIME
Adjust the session time by pressing the time adjustment buttons on the left and right of the time indicator. The session time
can be set between 10 minutes and 2 hours and 55 minutes (in 5-minute increments). A typical session time is between 15
and 60 minutes long.
Setting the time longer than 2 hours 55 minutes will put the device into Continuous Mode. To turn off Continuous Mode,
decrease the time. In Continuous Mode, the screen will display CONTINUOUS instead of the timer and will begin counting up
from zero when the session starts.
Time can be adjusted while the session is running. Tap the time adjustment buttons to add or subtract time from the session
in 5-minute increments.
BLUETOOTH WIRELESS TECHNOLOGY
The NormaTec Mobile App can connect your NormaTec device to a compatible smartphone via Bluetooth wireless technology.
For more information on the NormaTec Mobile App, please visit www.NormaTecRecovery.com/app.
Remote Control: Adjust, start, stop, pause, and monitor your recovery session from your smartphone.
Favorite Sessions: Save and load your favorite session settings from your smartphone.
Share Data: Share your recovery data to email, social media, and other training and tracking apps.
Monthly and Weekly Stats: View your weekly and monthly NormaTec recovery stats.
PAIR YOUR SMARTPHONE
Go to www.NormaTecRecovery.com/app and download the NormaTec Mobile App to your smartphone. Check your PULSE 2.0
device’s screen for the Bluetooth icon in the upper right. If it is not visible, press the Bluetooth button on the top of the device.
Open the NormaTec Mobile App. Register or login to the app, and then press the Bluetooth button on the top of the device to initiate
pairing. Enter the three-digit code that appears in the device’s time readout into the NormaTec Mobile App to finalize pairing.
If you would like to automatically pair to this device in the future, choose “yes” when asked if you want this to be your
favorite device.
TURN OFF BLUETOOTH WIRELESS TECHNOLOGY
To disable Bluetooth wireless technology on the device, press and hold the Bluetooth button on the top of the device for ten
seconds. The Bluetooth icon will disappear from the screen when it is disabled.
START THE SESSION
To start the session, tap the play/pause button.
