6
7/20 171215
SET-UP AND INSTALLATION
CAUTION
This unit uses a flammable refrigerant. Use care when handling and operating to
avoid damaging the refrigerant tubing or increasing the risk of a leak.
! WARNING
This appliance must be installed in accordance with all applicable national, state and
local regulations. This appliance is heavy. Use care when lifting and positioning. Work
in pairs when needed to prevent injury or damage. This appliance is not intended for
outdoor use. The store temperature should be at or below 75 F and a relative humidity
of 55% or less. At higher temperature or humidity conditions, the performance of these
cases may be affected and the capacity diminished. These cases should not be
positioned where it is directly exposed to rays of sun or near a direct source of radiant
heat or airflow. This will adversely affect the case and will result in poor performance.
Operating conditions range from 45ºF to 100ºF (7ºC to 38ºC). Operating this appliance
outside its range and installation requirements may affect performance and warranty
coverage.
Caster/Leg Installation
NOTICE
The Casters or Legs supplied with the unit must be installed for the unit to operate
properly. If they are not installed the unit will not perform properly and the warranty will
be void.
Once the appliance has been removed from its shipping container the Casters or Legs
will need to be installed when applicable. The Casters or Legs can be found packaged
inside the unit. Lay the unit on its back (protect the back surface to placing cardboard
down first). Protect the power cord so that it does not get pinched or damaged. The
plate style Casters attach to the bottom of the cabinet with 4 screws. The screws are
packaged with the Casters. The Casters with the locks should be installed on the front
of the unit. Be sure to tighten the screws snug to prevent them from coming loose.
Optional Legs attach similarly.
