manualshive.com logo in svg

norix PRD100, Руководство по сборке

Поделиться
Скачать
norix PRD100 Скачать руководство пользователя страница 1

Drill Guide, Pin (1)

011-063

5/8" Drill Bit (1)

029-944

Shim (4)

060-197

Screw, 5/16-18 X 5/8" L, BH (2)

021-118

Ball Lock Pin (2)

002-027

Guide Tube (2)

029-941

Pin Extractor Tool (1)

011-066

Concrete Anchor,

5/16" X 2" L (4)

024-024

Floor Anchor Bracket (2)

011-058

Anchor Hook, Left (1)

011-067

Anchor Hook, Right (1)

011-068

Anchor Tab, Straight (2)

011-059

Important Note:  For a successful installation, careful and accurate 

layout of the anchor brackets is a must.  Read through the 

instructions first and familiarize yourself with all of the steps.  If you 

have any questions, please call Norix Customer Care before 

proceeding.  Norix is not responsible for damage to components 

due to improper installation.

Security Caulk is highly recommended to help seal gaps and 

secure the furniture in place.  Apply caulk to clean surfaces. 

Anchor hardware:

  Please familiarize yourself with the anchoring components as shown below.  

If any components are missing, contact Norix Customer Care before proceeding.

Patents Pending

Parts List

ITEM

QTY.

PART NUMBER

DESCRIPTION

A

1

XXX

XXX

Tools Needed

Low RPM Variable Speed Drill

Hammer Drill

5/16" masonry drill bit

Pin-in-Torx® Driver Bit T-40 (provided)

5/8" Drill Bit (provided)

Rev. C - 10/20/20

091-989

Page 1 of 13

www.norix.com ● TEL 800 234-4900

Assembly Notes: 

Norix is not responsible for any damage due to improper installation.  If your shipment does not match the parts list, please contact Norix Customer Service at 800-234-4900.

                                  Norix reserves the right to modify design specifications at any time without an obligation to owners of previously sold products.

 ___________________________________________________________________________________________________________________________________________________________________________________________________

Prodigy Bed

Assembly Instructions

Model Number

PRD100

Содержание PRD100














Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды