E
Restraint Ring Bracket
Screw, 1/4-20 X 3/4" L
Ensure that end of bracket tube is
flush or slightly protruding with
outside surface of bed.
AD
1/4-20 Screws
AE
#12 Sheet Metal
Screws
AF
6.
Install Brackets
Insert the Bracket into the drilled hole in the
Bed.
Install the Restraint Ring & Pin into the Bracket.
If there is play in the bracket, push it toward
the outside of the bed while installing the (2)
1/4-20 Screws.
Tighten the screws.
Do not overtighten.
Install (2) #12 Sheet Metal Screws on the back
side of the Bracket. No pre-drilling is required.
Tighten the screws until snug.
Do not overtighten.
Repeat for all locations.
Test the fit and function of all Pins with and without
Restraint Rings in all locations before anchoring the bed.
Adjust Brackets if necessary to ensure that Pins lock in all
positions.
Page 4 of 5
Rev. F - 1/12/21
091-991
