2
RC-9018C Operation Overview
Power Saving Mode
If you set "Powersave dsply" to "Yes" ( P15),
unnecessary power consumption by the remote
controller is prevented. If approximately ten minutes
pass without using hot water or without pressing a
button, the display of the remote controller turns off.
This setting is adjustable
P15
[When using only one water heater:]
It is possible to set the remote controller to
alert the user when the
water delivery volume
has reached a
preset fill volume.
P22
It is possible to lock
remote controller
operation.
P14
It is possible to
automatically turn
the water heater
“ON” or “OFF”.
[
For recirculation systems (
)]
It is possible to circulate hot water only
during preferred times of day.
P12
P20
Automatically
turned "ON"
Automatically
turned "OFF"
Pi Pi !!
Basic operation
The initial setting is set to "Powersave dsply : No-1"
* If you use hot water or press a button, "Powersave dsply" is released.
If you press the PROG button only once, "Powersave dsply" is released and the automatic program
function will operate.
* If the setting temperature is set to 55°C or more, "Powersave dsply" will not function to prevent
accidental scalding.
* If "Recirc" is operating, "Powersave dsply" will not function.
The display turns off
(operation is "ON")