Noritz EZ2FVK-2, Руководство по установке, Страница: 14 / 24

14
Step Installation Procedure(ex. @Garage) Necessary Tool
10 Take off the existing rain cap and place it on the area where it does not fall from the rooftop.
* Make sure the inside surfaces of the " ④ B-Vent" are clean to ensure a good seal of
the parts in this step.
Wet Towel
11 Use a marker to mark the original position of the " ③ Flex Pipe 2"" , at " ④ B-Vent" 's upper tip.
Marker
12 Slide-in the " ② Top Flex Support"
to the
" ③ Flex Pipe 2""
.
② Top Flex
support
Mark is very important for the function. Do not skip this step.
(Necessary for the next step.)
Be sure to do
Inert the
" ② Top Flex Support"
's slit straight into the Flex Pipe groove.
Be sure to do
Verify that you can see the mark you made at the top end of the " ② Top
Flex Support"
in the previous step.
Be sure to do
Step-2
Slide-in
Pull up
Mark