13
How to Use (Using the optional remote controller)
Remote Controller
Optional Remote Controller (RC-7651M)
For setting the hot
water temperature,
the flow meter alarm,
and other settings.
Power On/Off Button
For turning electrical
power to the unit on
and off.
Flow Meter Alarm Set Button
For setting the flow
meter alarm.
(pages 16 - 17)
Setting Buttons
* Before use, remove the protective sheet from the remote controller surface.
Temperature Setting
(Ex.:115°F)
Flow Meter Setting
The display will flash
after hitting the flow
meter alarm set button.
(page 16)
Error Code
When this indicator is lit,
the hot water temperature
can be set.
(page 14)
If you want to change the temperature of supplied hot water frequently or you want to set
the amount of hot water to accumulate the hot water, this remote controller is useful.
A number will flash if
a failure occurs.
(page 25)
Priority Indicator
Burner On Indicator
When burning, the
indicator is lit.
(pages 14 and 16)
Note: Initial factory setting is set to display in °F and gallons.
To adjust the display to °C and liters, refer to the Installation Manual.
What is actually displayed depends on how the water heater is set.