Norfield 250MX, Руководство пользователя, Страница: 8 / 31

8
Inspect the machine at the beginning and end of each shift for damaged or
cracked components such as, but not limited to, saw blades, router bits, drill
bits, and boring bits.
Never leave this machine unattended while it is in operation. Make sure that
all electrical and air is in the off position when the machine is not in use or is
unattended and that any cutting blades have come to a complete stop.
Do not attempt to clean material from this machine until all the cutting blades
have come to a complete stop. Even when the machine has been turned to
the “off” position it may take up to several minutes for the blades to coast-
down to a complete stop.
Woodworking machinery is inherently dangerous, common sense and good
safety practices are your best defense against injury.
If you have any questions regarding the correct operation of the machine and
safety procedures in this manual call the Norfield Industries Service Depart -
ment at (800)-824-6242
SAFETY