Recording System Configuration Data
CAUTION:
It is imperative to record default system settings prior to servicing certain system components. To
prevent component damage and minimize downtime after replacing components, take photos of the HMI Setup
Screens while the equipment is fully operational. The data reflected by the screen shots can be utilized to
restore key system settings. Refer to the
HMI Screen Description Manual
for an overview of HMI Control Panel
Screens.
Key system data to capture will appear on the following HMI Control Panel Screens:
Interlock Setup
Level 1 Setup Menu
Level 2 Setup Menu
Meter Setup
Miscellaneous Pressure Setup
Position Setup
Pressure Limits Setup
Pressure Sensor Calibration
Purge Setup
Shot Sequence Setup
Shot Setup
System Setup
Valve Setup
Stroke Adjustment
It may be necessary to adjust the stroke of the inlet and outlet valves. Loosen the stroke adjustment lock nuts
and make fine adjustments to the stroke adjustment bolt until the desired shot pattern is achieved. Refer to the
Customer Product Manual
for an illustrative view of the stroke adjustment lock nut and bolt.
CAUTION:
Be careful not to fully tighten stroke bolt as this may impact the operation of the valve.
6
