16. Select the
High/Low Vol Outlets
push button on the
Valve Setup
HMI Control Panel Screen to open the
outlet valves.
17. Select the
Level 1 Setup
push button on the
Valve Setup
HMI Control Panel Screen.
18. From the
Level 1 Setup Menu
, select the
Setup Logi
n push button.
19. From the
Setup Login
HMI Control Panel Screen, proceed to the
Main Menu
HMI Control Panel Screen.
20. Click on the
Cycle Control
push button to proceed to the
Cycle Control
HMI Control Panel Screen.
21. Enable the
Manual Shot
push button and then select the
Manual Dispense
push button to dispense
material.
WARNING:
Utilize a suitable container to collect material dispensed.
NOTE:
The electric foot switch may also be utilized to dispense material.
22. Repeat steps 2 through 18 (as necessary) until material is air free.
23. From the
Cycle Control Screen
, proceed to the
Main Menu
HMI Control Panel Screen.
24. Select
Setup Login
push button to proceed to
Setup Login
HMI Control Panel Screen.
25. Select the
Logout
push button to log out of the HMI Control Panel.
HMI Control Panel Login
1. Proceed to
Main Menu
HMI Control Panel Screen.
2. Select
Setup Login
push button to proceed to
Setup Login
HMI Control Panel Screen.
3. Log into the HMI Control Panel using the default user name and password. The default user name is `
S
’.
The default password is `2’.
NOTE:
Proceed to
Main Menu
HMI Control Panel Screen.
Select
Setup Login
to proceed to
Setup Login
HMI Control Panel Screen.
Select
Level 2 Setup
to proceed to
Level 2 Setup
HMI Control Panel Screen.
4
