Nordson Encore LT Automatic, Руководство пользователя по изделию

Страница: 15 / 71

Description
2-3
Part 1604858-01
E
2013 Nordson Corporation
Triggering
Single/Dual Gun Controller
Each gun controlled by a single or dual gun controller can be locally
triggered with the Enable/Disable buttons on the gun controller keypads, or
remotely triggered by a PLC or other switching device.
Multi-Gun Controller
Multi-gun controllers are normally triggered remotely by a PLC or other
switching device. The Trigger All switch on the front panel triggers all guns
manually.
Interlock Keyswitch
The Interlock keyswitch (multi-gun controller only) has three positions:
Ready: Normal operation. Guns can be triggered, as long as the conveyor
is running. This prevents powder waste and hazardous operating situations.
Bypass: Allows you to trigger the guns on and off without running the
conveyor. Use the Bypass position to set up and test spray gun settings.
Lockout: Guns cannot be triggered. If Axis Controllers are installed in the
multi-gun controller, the in/out positioners and oscillators or reciprocators
cannot be moved. Use this position when working inside the booth.
CONVEYOR
BYPASS
READY
LOCKOUT
Figure 2-3 Interlock Keyswitch