Operator A
1
2
3
Blow off the inlet duct at the
end of the booth.
Starting from the open end of the
booth, blow off the ceiling, walls, and
floor, working from top to bottom and
When Gun Blow
Off/Purge Cycle is
complete:
Open the vertical duct door and
blow off the duct.
floor, working from top to bottom and
toward the closed doors.
Swing open the Aerodecks after
blowing them off.
complete:
Blow off doors at
entry end of the
booth.
For Hard-to-Clean Powders:
Wipe down the booth interior,
10
© 2008 Nordson Corporation
All Rights Reserved
p
,
inlet duct, and vertical duct with
damp cotton towels.
