Nordson BC5100, Руководство по эксплуатации продукта

Страница: 7 / 46

BC5100 Bar Code Scanner
3
Part 1076483A
E 2007 Nordson Corporation
S
If you receive even a slight electrical shock, shut down all electrical
equipment immediately. Do not restart the equipment until the problem
has been identified and corrected.
S
Obtain and read Material Safety Data Sheets (MSDS) for all materials
used. Follow the manufacturer’s instructions for safe handling and use
of materials, and use recommended personal protection devices.
S
To prevent injury, be aware of less-obvious dangers in the workplace
that often cannot be completely eliminated, such as hot surfaces, sharp
edges, energized electrical circuits, and moving parts that cannot be
enclosed or otherwise guarded for practical reasons.
Fire Safety
To avoid a fire or explosion, follow these instructions.
S
Shut down all equipment immediately if you notice static sparking or
arcing. Do not restart the equipment until the cause has been identified
and corrected.
S
Do not smoke, weld, grind, or use open flames where flammable
materials are being used or stored.
S
Provide adequate ventilation to prevent dangerous concentrations of
volatile materials or vapors. Refer to local codes or your material MSDS
for guidance.
S
Do not disconnect live electrical circuits while working with flammable
materials. Shut off power at a disconnect switch first to prevent sparking.
S
Know where emergency stop buttons, shut off valves, and fire
extinguishers are located.
S
Clean, maintain, test, and repair equipment according to the instructions
in your equipment documentation.
S
Use only replacement parts that are designed for use with original
equipment. Contact your Nordson representative for parts information
and advice.
Action in the Event of a Malfunction
If a system or any equipment in a system malfunctions, shut off the system
immediately and perform the following steps:
S
Disconnect and lock out electrical power. Close pneumatic shutoff
valves and relieve pressure.
S
Identify the reason for the malfunction and correct it before restarting the
equipment.
Equipment Disposal
Dispose off equipment and materials used in operation and servicing
according to local codes.