Nordson 1604629, Руководство оператора

Страница: 5 / 12

1604620 - EN Page 5 of 12
Figure 3
FOR THE
AIR MOTOR SECTION
SEE PAGES 6 & 7
COLOR CODE
DIAPHRAGM BALL
MATERIAL COLOR COLOR
Hytrel Cream Black ( )
Santoprene Tan Tan
PTFE White White
Viton Yellow ( ) Yellow ( )
( ) Dot
ASSEMBLY TORQUE REQUIREMENTS
LUBRICATION / SEALANTS
NOTE: DO NOT OVERTIGHTEN FASTENERS.
(6) diaphragm nut, 60 - 70 in. lbs (6.8 - 7.9 Nm).
(29) nut, 50 - 60 in. lbs (5.6 - 6.8 Nm), / alternately and evenly, then re-torque after initial run-in.
Apply pipe sealant to threads.
Apply Loctite 242 to threads.
Apply Lubriplate to all “O" rings, ”U" cups and mating parts.
Apply anti-seize compound to threads and bolt and nut flange heads which contact pump
case when using stainless steel fasteners.
19
21
22
19
21
22
77
15
29
43
7 1
26
60
29
29
61
26
Torque Sequence
1
6
4
3
5
2
8 Air Side Santoprene (tan)
Fluid Side PTFE (white) 7
View for PTFE diaphragm configuration
Chamfer (fluid inlet side)
Radius (ball side)
Stainless steel seat installation
5 27 6 63
PART LIST / FLUID SECTION