ValveMate 7100 Controller
17
www.nordsonefd.com [email protected]
+1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Input / Output Connections
The 10 pin terminal strip includes 5–24 VDC and contact closure CC initiate inputs. Outputs include an
Alarm Out, End-of-Cycle (EOC), and a 24 VDC courtesy power.
• 5–24 VDC INIT: Dispense initiate input activated with a 5–24 VDC input voltage.
• EOC OUT: End-of-Cycle feedback.
• ALARM OUT: Circuit that closes when an alarm condition is present.
• CC INIT: Dispense initiate input activated with a contact closure switch.
• 24 VDC OUT: Courtesy output, 24 VDC, 200 mA.
NOTE:
ALARM OUT and EOC (End-of-Cycle) only function in the RUN mode.