background image

ValveMate 7100 Controller

23

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

How To

How to Make On-the-Fly (OTF) Time Adjustments in RUN Mode

Step 1  Press CYCLE 

 button to enable OTF; display will blink.

Step 2  Press 

 or 

 buttons to adjust valve on time.

Step 3  Press CYCLE 

 button to disable OTF; display no longer blinks.

How to Set Controller to STEADY Mode

Step 1   Press  MODE 

 button and scroll to STEADY.

Step 2  Press 

 or 

 to toggle between TIME and STEADY 

 operation.

Step 3  When 

 appears on LED display, press Mode button to return to RUN.

How to Use the TEACH Mode

Step 1   Press  MODE 

 button and scroll to TEACH.

Step 2   Press and hold CYCLE 

 button or depress the foot pedal in the TEACH mode. LED display 

will begin “flashing” before TEACH function begins.

Step 3   Add incremental time by continued press and hold of CYCLE 

 button or depress and hold 

the foot pedal.

Step 4   To fine-tune programmed pulse time, press 

 or 

 to decrease / increase time.

Step 5   Press  both 

 

 to 0.000 out time and restart the TEACH process.

How to Use PURGE Mode

Step 1   Press  MODE 

 button and scroll to PURGE.

Step 2   Press  CYCLE 

 button or depress foot pedal to purge dispense valve.

Содержание ValveMate 7100





























Отзывы: