Unpack Unit
Unpack the contents of the package and lay them out on a clean
work bench. The following items should be included with your
Performus dispensing system:
a. Dispenser
b. Foot pedal assembly
c. Power supply
d. Syringe barrel adapter
e. Syringe barrel stand
f. Folding wire stand (not shown)
1
Connect Air Supply
NOTE:
Clean, dry filtered factory air is required to meet warranty.
If your air supply is not filtered, order the EFD five micron filter
regulator (P/N 7016547).
Turn the air regulator adjustment knob to zero (0) before
connecting the main air input to the Performus.
a. Push one end of the 6 mm air input hose into the input fitting
(AIR IN) on the back of the Performus.
b. Connect the other end of the hose to your plant air supply.
c. Set plant air supply at minimum 5.5–7.0 bar (80–100 psi).
d. Keep the vacuum feature turned off by turning the vacuum
control knob all the way counter-clockwise. If the fluid you
are dispensing is a thin, watery, or low viscosity consistency,
proceed to “Using the Vacuum Control Feature for Low
Viscosity Fluids” on page 15.
2
Installation
e
d
a
b
c
2
Performus I Dispensing System
11
www.nordsonefd.com [email protected]
+1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
