Specifications
General
Size:
90.1 mm length x 31.1 mm diameter (3.55” x 1.22”)
Valve seal/diaphragm:
FDA-approved UHMW* polymer
Air cylinder body:
Hard-coated aluminum
Fluid inlet thread:
1/4 NPT female
Output thread:
1/4 NPT female
Air pressure required:
70 to 90 psi (4.8 to 6.2 bar)
Maximum fluid pressure:
100 psi (6.9 bar)
Maximum operating temperature:
43°C (110°F)
725HF-SS
Weight:
295 grams (10.4 oz)
Shaft and sealing head screw:
303 stainless steel
Fluid body and cap:
303 stainless steel
Mounting hole:
5/16-24
725HF-A
Weight:
181 grams (6.4 oz)
Shaft and sealing head screw:
Teflon
®
-coated 303 SS
Fluid body and cap:
inert acetal copolymer
*
Ultra High Molecular Weight
For consistent dispense valve operation and easy adjustment
of valve output, EFD recommends using the ValveMate 7000
controller on all automatic, semi-automatic and benchtop
applications.
The EFD Ultra TT Series positioning systems incorporate
dispensing control into the main system.
Contact the EFD Dispense Valve Systems Group for details.
For EFD sales and service in over 30 countries,
contact EFD or go to www.efd-inc.com/contact
EFD, Inc.
East Providence, RI USA
800-556-3484; +1-401-434-1680 (outside the USA)
[email protected]
www.efd-inc.com
EFD International Inc.
Dunstable, Bedfordshire, UK
0800 585733 or +44 (0) 1582 666334
Ireland 00800 8272 9444
[email protected]
www.efd-inc.com
EFD, Inc., Asia
China: +86 (21) 5854 2345
[email protected]
www.efd-inc.com/cn
Singapore: +65 6896 9630 [email protected]
Teflon is a registered trademark of DuPont.
©2006 Nordson Corporation 725HF-INSTALL-01 v062606
®
A NORDSON COMPANY
