Nordpeis Quadro Colorado, Инструкция по установке и эксплуатации, Страница: 10 / 68

10
GB
Weight
The home owner must ensure that the floor can
withstand the load according to the total weight of the
fireplace. When installing the product on a floating wood
floor, the floor boards underneath the fireplace must be
removed, this to avoid the that the floor boards lock and
crack.
Adjustment
We recommend to stack the surround without glue in
order to adjust the insert prior to perforating the chimney
for the flue connection. Use a spirit level to ensure that
the surround is mounted straight. The insert will expand
with heat and for this reason the surround must not rest
on the insert. (Above the insert there must be a gap
of 3 to 5 mm. Laterally there is no need for gaps, but
between the lower part of the insert and the surround
there must be a gap of at least 2 mm.)
INDEX
1. General information 10
Weight 10
Adjustment 10
Floor plate 10
Minor damage 10
Fine fissures 10
Painting 10
2. Before Installing a new fireplace 10
Chimney Draught 11
Air Supply 11
Floor plate 11
Dimensional drawing 11
3. Technical Information 11
4. Safety distances
12
5. Assembly 12
Assembly 12
Fresh air supply set 12
Operating Control 12
Removing self-closing door mechanism
12
6. Lighting the fire for the first time 13
Lighting a fire 13
7. Maintenance 13
Cleaning and inspection 13
Ashes 13
Thermotte™ Insulating Plates
13
Door and glass 13
8. Warranty 14
9. Advice on lighting a fire 14
Some advice in case of combustion problems 16
Dimensional drawing 51
Safety distances 53
1. General information
Floor plate
A fireproof floor plate must be put in front of the fireplace
if the floor is of a combustible material.
Minor damage
The fireplace can sustain minor damage during
transport and handling.
This can be repaired with acrylic/light filler. For perfect
results, you can fill and sand with a suitable filler. Minor
damage and uneven surfaces can be filled. If the
damage is deep or in the event of significant damage,
you are recommended to fill repeatedly with tile
adhesive or cement putty to avoid sinking. Smooth off
with e.g. a damp sponge or a float.
Fine Fissures
The building material around the fireplace can move.
In new houses in particular, it is common for building
materials to settle substantially in the early years. In
addition, all concrete elements shrink to a decreasing
extent for up to 15 months.
The result is that small cracks may appear in the
concrete/masonry.
Use the fireplace for a few months. If cracks appear,
scrape them out with a screwdriver or similar (to provide
more space for acrylic joint filler). Vacuum the surfaces
to remove any dust.
Inject acrylic joint filler and even it out with a spatula or
a finger wetted with soapy water.
The joint can be painted after a couple of days.
Painting
When the fireplace has been filled/sanded and the
glued joints are dry, the fireplace is ready to be painted.
Use only breathable paint (acrylic) intended for
masonry.
For your own safety, comply with the assembly instructions. All
safety distances are minimum distances.
Installation of the insert must comply with the rules and
regulations of the country where installed. Nordpeis AS
is not responsible for wrongly assembled inserts.
We accept no liability for typographical errors and changes.
2. Before Installing a new fireplace
All our products are tested according to the latest
European requirements and also
to the Norwegian
standard NS 3058 and NS 3059, which include particle
tests. However, several European countries have local
regulations for installation of fireplaces, which change
regularly. It is the responsibility of the client that these
regulations are complied with in the country/region
where the fireplace is installed. Nordpeis AS is not
responsible for incorrect installation.
Important to check
(please note that this list is not exhaustive):