Nordmende WMI1471WH, Руководство пользователя

Страница: 11 / 33

9
10
INSTALLATION
1.
Check if the legs are closely attached to the cabinet. If not, please turn them to their
original positions tighten the nuts.
2.
Loosen the lock nut turn the feet until it closely contacts with the floor.
3.
Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washer dryer
•
The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet
pipe. 1.Connection between ordinary tap and inlet hose.
2
3
4 1
Raise
Lower
Lock nut
foot
Warning!
！
Warning!
！
Loosen clamp nut and
four bolts Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2
3
4 1
Connection finished
clamp nut
Tap with threads and inlet hose
Special tap for washer dryer
2.Connection between screw tap and inlet hose.
slide bushing
•
To prevent leakage or water damage, follow the instructions in this chapter.
•
Do not kink, crush, modify or sever the water inlet hose.
•
For m odels with hot valve, connect to the hot water tap with the hot water supply
hose. Energy consumption will decrease automatically for some program mes .