background image

EN - 11

•  If a cooker hood or cupboard is to be 

installed above the appliance, the safety 

distance between cooktop and any 

cupboard/cooker hood should be as 

shown below.

HOB

Minimum 

42 cm

Minimum 

42 cm

Minimum  65 cm (with 

hood)

Minimum 70  cm (without 

hood)

•  The appliance should not be installed 

directly above a dishwasher, fridge, 

freezer, washing machine or clothes 

dryer.

•  If the base of the appliance is accessible 

by hand, a barrier made from a suitable 

material must be fitted below the base 

of the appliance, ensuring 

that there is 

no access to the base of the 

appliance

.

•  The appliance can be placed close to 

other furniture on condition that, in the 

area where the 

appliance

 is set up, the 

furniture’s height does not exceed the 

height of the cooktop.

2.2. 

inStallation of the hob

The appliance is supplied with an 

installation kit including adhesive sealing 

material, fixing brackets and screws.

•  Cut the aperture dimensions as 

indicated in the figure. Locate the 

aperture on the worktop so that, after 

the hob is installed, the following 

requirements are followed:

W (mm)

680  

min. A (mm)

50

D (mm)

515

min. B (mm)

150

H (mm)

39,5

E (mm)

10

C1 (mm)

560

min. F (mm)

10

C2 (mm)

480/490

W

D

C2

A

B

C1

H

F

HOB

Содержание HGX703IX
























Отзывы: