NORDline RD250L, Инструкция пользователя

Страница: 8 / 40

EN - 6 -
PART- 2. THE VARIOUS FUNCTION AND POSSIBILITIES
Thermostat Setting
Thermostat automatically regulates the inside temperature of the refrigerator. By rotating
the knob from position 1. to 5., colder temperatures can be obtained.
Important note: Do not try to rotate knob beyond 1 position it will stop your appliance.
• For short-term storage of food in the refrigerator, you can set the knob between
minimum and medium position.(1-3)
• For long-term storage of food in the refrigerator, you can set knop medium position.(3-
4)
Note that; the ambiant temperature, temperature of the freshly stored food and how
often the door is opened, affects the temperature in the refrigerator compartment. If
required,change the temperature setting.
• When you first switch on the appliance, for starting a suitable cooling, the appliance
should work 24 hours continuously until it cools down to sufficient temperature.
• In this time do not open the door so often and place a lot of food inside the appliance.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before
restarting or re-plugged the unit in order not to damage the compressor.
• Larders (coolers) have not any freezer compartment but can cool up to 4-6°C.
If your fridge is not cooling enough;
Your fridge is designed to operate in the ambient temperature intervals stated in the
standards, according to the climate class stated in the information label. W e do not
recommend operating your fridge out of stated temperatures value limits in terms of
cooling effectiveness.
Climate Class Ambient Temperature (°C)
T Between 16 and 43 (°C)
ST Between 16 and 38 (°C)
N Between 16 and 32 (°C)
SN
Between 10 and 32 (°C)