Norditalia KANSAS, Руководство по эксплуатации

Страница: 7 / 10

8. Press (on both the remote handset or ipod) to enter the iPod menu.
9. (on both the remote handset or ipod) for selection
10. (on both the remote handset or ipod) to operate selection.
11. on the remote handset (iP only section) or rotate /POWER knob on the front panel adjust the Volume
sound level.
12. Press STOP on the remote handset to stop playing.
13. To switch off the iPod, press and hold the PLAY/PAUSE button for a few seconds until the iPod
display has turned dark. Note: The iPod will keep charging when docked until fully charged.
14. To play the music again, simply press the PLAY button.
15. To safely remove the iPod, first press and hold the PLAY/PAUSE button for few seconds until the
iPod display has turned dark, then switch off the unit by the VOLUME/POWER knob.
*IMPORTANT NOTE:
To avoid malfunction on both your iPod and the iP Dock, make sure your iPod, as well as the
POWER of the Jukebox, is switched off before inserting your iPod into the iP Dock!
NOTE:
1. The main rotary VOLUME knobs on the front panel of the jukebox control the volume
loudness of CD & iP Dock.
2. When using the remote control handset to adjust the volume of the iP Dock, the main Volume
knob should be set at your maximum desired sound level.
3. When using the iP dock with your iPod, it is recommended to set the iPod Backlight Timer to
“ALWAYS ON” for easy reference.
MUTE DISC PLAY
1. Press MUTE button to muting the sound while playing disc. *The MUTE indicator on the CD control
panel will be lighted up.
2. To resume press MUTE again and the MUTE indicator will goes off
LIGHT OPERATION
1. LIGHT MODE (MEMPHIS model ONLY)
The colors of the lights change overtime gradually, press COLOR FLASH to remain static toyour
favourite color. Press it again to resume.
2. LIGHT MODE (KANSAS, NEW ORLEANS models only)
The colours of the lights are continually changing. Move the PLAY/HOLD switch to the “HOLD”
position for the lights to remain static at your favourite colour.
Note: The colour changing system will not work while in AM (MW)/FM radio mode -- the LED lighting
Will automatically change to the “BLUE” light only
IMPORTANT NOTES
The colour changing sequences of the lights are controlled by IC (Integrated Circuit).
•
The lights may turn off when the light mode is in the HOLD position, this is normal and
not a malfunction.
•
Press the small RESET button to clear all light mode pre-sets and start again.
•
When the colour changing sequences are not in the right order, press the RESET button or
•
press the LIGHT button on the front panel to switch off all the lights for few seconds.
RADIO OPERATION
1. Uncoil the Wire Antenna and extend fully for better reception.
2. Set the MODE selector to your desired band.
3. Tune to the desired radio station by using the TUNING knob.
4. To turn the radio off, press the POWER button.
AUXILIARY CONNECTION AUX IN (IF EQUIPPED)
1. Connect your own device (i.e. MP3 Player or iPod) to the AUX IN connection located on
the back of the cabinet, together with stereo plug and detachable rack (packed separately).