Norditalia KANSAS, Руководство по эксплуатации

Страница: 6 / 10

l
TO PLAY A CD
1. Press the ON/OFF switch and select MODE SELECTOR to CD.
2. Flip open the semi circle “CD DOOR”
3. Turn the “RESET” pointer to “OFF” position and insert a disc onto the disc tray.
**(Make sure the “RESET” pointer in “ON” position after disc loaded.)
4. Press the PLAY/PAUSE button to play the CD, press once again to temporarily stop disc play.
5. Press STOP to stop playing the CD.
6. Adjust listening level and sound effect with Volume knob and Loudness button.
7. Press SKIP FORWARD to skip ahead to next track. Press SKIP BACKWARD to skip back to
previous track. The track number will be displayed in readout.
NOTE:
If the disc is seriously scratched, or too dirty, disc play may not start.
If an improperly centered disc is played, noise can be heard in the mechanism. The use of such discs
should be avoided.
NOTES ON CD-R/RW DISCS
•
Because of non-standardized format definition/ production of CD-R/RW, playback quality
and performance are not guaranteed.
•
Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions,
such as PC performance, writing software, media ability, etc.
•
Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
PROGRAMMED DISC PLAY
It is not possible to enter programs during disc play. Press the STOP button first, then enter a program.
1. Press the STOP button.
2. Press the PROGRAM button. Select a track number using SKIP FORWARD or SKIP BACKWARD
button, press PROGRAM button again
3. Repeat step 2 until all the desired tracks are programmed in memory
4.
NOTE:
- To modify the program, press the STOP button and restart from step 2.
-To clear the program, press the STOP or power is switched off
REPEAT DISC PLAY
1. Press REPEAT button once to repeat disc play of one track.
2. Press REPEAT button twice to repeat all the track on the disc.
3. Select the desired track for disc play using SKIP FORWARD or SKIP BACKWARD button.
4. Press the PLAY/PAUSE button to play
5. Press STOP button to cancel repeat mode.
6.
RANDOM DISC PLAY
1. Press the RANDOM button to play CD in random order.
2. To cancel RANDOM, press STOP button
MUTE DISC PLAY
1. Press MUTE button to muting the sound while playing disc. *The MUTE indicator on the CD control
panel will be lighted up.
2. To resume press MUTE again and the MUTE indicator will goes off
USING THE IP DOCK (for those models with Ipod connection)
1. Connect the Mains Lead and Plug to a suitable AC Mains wall outlet.
2. Open the iP dock drawer at the lower part of unit.
3. Insert your iPod into the iP Docking station before switching it on and ensure the iPod is firmly
seated.
4. Set the MODE SELECTOR to IP. (The iP Dock indicator light should light up).
5. Rotate the VOLUME/POWER knob clockwise to turn on the unit.
6. Press the PLAY/PAUSE button (on both the remote handset or ipod) to start playing the music.
Note: Whilst in the dock, the internal battery of the iPod will be charged.
7. Press PLAY/PAUSE once again to pause the music.