Easy pit
ch
Then attach the poles inside Vimur as described in the Vimur set up instruc-
tions. At the connection end of Vimur, there is a secondary pegpoint.
This now becomes the corner pegpeoint. The original corner becomes
obsolete and can stay relaxed under the Midgard overhang.
Attach the original guyline from the Midgard center door across the ridge of
Vimur to the opposite Vimur top ridge end loop. Create tension by the slider.
Your Midgard connection is complete.
At the reverse T door end, you will find a concealed apsis. This can selectively
be used. Setup up by releasing from the loop holders, and extend the center
point and peg this – there are more pegpoints which we suggest to peg as
well. There is now a side zipper which you can use for exit/entry.
