Nordis NDI-07ONF, Руководство пользователя

Страница: 25 / 32

Installation of indoor unit
24K Heat pump type:
07 09K 12K 18K Heat pump type:
Outdoor unit connection
violet orange
yellow-
green
2 4 5 N(1)
blue black
3.
2.
Remove the wire clip; connect the power connection wire to the wiring terminal
according to the color; tighten the screw and then fix the power connection wire
with wire clip.
Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
1.
outlet
pipe
drain hose
drain hose
tape
outlet pipe
drain hose
insulating pipe
● Add insulating pipe in the indoor
● The plastic expansion particles are
1.
wiring cover
screw
panel
Step six: install drain hose
Step seven: connect wire of indoor unit
2.
Connect the drain hose to the outlet pipe of
indoor unit.
Bind the joint with tape.
Note:
not provided.
drain hose in order to prevent
condensation.
Open the panel, remove the screw
on the wiring cover and then take
down the cover.
21
Outdoor unit connection
yellow-
green
brown violet orange
N(1)
blue black
2 3 4 5
N(1)
blue
yellow-
green
Outdoor unit connection
black
24K Cool only type:
28K:
09K 、 12K 、 18K Cool only type:
Outdoor unit connection
N(1)
blue black brown
2 3
yellow-
green