NordicTrack X15i, Руководство пользователя

Страница: 15 / 52

15
77 77
13. If necessary, move the incline trainer to the
desired location (see HOW TO MOVE THE
INCLINE TRAINER on page 39).
After the incline trainer is placed in the location
where it will be used, make sure that the incline
trainer rests firmly on the floor. If the incline
trainer rocks even slightly, turn the Leveling
Feet (77) as needed until the rocking motion is
eliminated.
Then, connect the coaxial cable from your wall
(or device) to the Upright Coaxial Cable (107) in
the left Upright (83).
13
14. Make sure that all parts are properly tightened before you use the incline trainer. Keep the included hex
keys in a secure place. One of the hex keys is used to adjust the walking belt (see page 41). To protect the
floor or carpet from damage, place a mat under the incline trainer. To avoid damage to the console, keep the
incline trainer out of direct sunlight. Note: Extra parts may be included.
12. Attach the TV assembly (F) to the console
assembly (B) with the four 5/16" x 3/4" Screws
(99) that you removed in step 11;
start all four
Screws, and then tighten them. Be careful
not to pinch the wires.
Attach the Lower TV Bracket Cover (103) with
two #8 x 3/4" Screws (5);
start all four Screws,
and then tighten them. Do not overtighten the
Screws.
12
103
83
107
99
99
B
F
Coaxial
Cable
5