NordicTrack T 13.5 Скачать руководство пользователя

Страница: 29 / 40

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline

to zero before you fold the treadmill. Then, remove

the key and unplug the power cord. CAUTION: You

must be able to safely lift 45 lbs. (20 kg) to raise,

lower, or move the treadmill.

1. Hold the metal frame firmly in the location shown

by the arrow below.

CAUTION: Do not hold the

frame by the plastic foot rails. Bend your legs

and keep your back straight.

2. Raise the frame until the storage latch locks in the

storage position.

CAUTION: Make sure that the

storage latch locks.

To protect the floor or carpet, place a mat under the

treadmill. Keep the treadmill out of direct sunlight.

Do not leave the treadmill in the storage position in

temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, fold it as described at the

left.

CAUTION: Make sure that the storage latch is

locked in the storage position. Moving the treadmill

may require two people.

1. Hold the handrails with both hands and care-

fully push the treadmill to the desired location.

CAUTION: Do not move the treadmill without

tipping it back, do not pull on the frame, and do

not move the treadmill over an uneven surface.

HOW TO LOWER THE TREADMILL FOR USE

1. Press on the

upper end of the

treadmill with

your hands, press

the storage latch

with your foot

in the location

shown, and then

allow the frame to

lower to the floor.

Handrail

Wheel

Frame

Latch

Frame

Storage

Latch

Содержание T 13.5









































Результаты поиска

Содержание T 13.5

Отзывы:

Похожие инструкции для T 13.5

Бренды по названию

Популярные бренды

NordicTrack T 13.5, Руководство пользователя

Результаты поиска

Содержание T 13.5

Отзывы:

Похожие инструкции для T 13.5

Бренды по названию

Популярные бренды