NordicTrack T 13.5 Скачать руководство пользователя

Страница: 25 / 40

5. Measure your heart rate if desired.

See step 6 on page 22.

6. Turn on the fan if desired.

See step 7 on page 23.

7. When you are finished exercising, remove the

key from the console.

See step 8 on page 23.

HOW TO USE AN IFit WORKOUT

Note: To use an iFit workout, you must have an

optional iFit module.

To purchase an iFit module at

any time, go to www.iFit.com or call the telephone

number on the front cover of this manual.

You must

also have access to a computer with a USB port and

an internet connection. In addition, you must have

access to a wireless network including an 802.11b/g/n

router with SSID broadcast enabled (hidden networks

are not supported). An iFit.com membership is also

required.

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 21.

2. Insert the iFit module into the console.

To insert the iFit module, see the instructions

included with the iFit module.

IMPORTANT: To satisfy exposure compliance

requirements, the antenna and transmitter in

the iFit module must be at least 8 in. (20 cm)

from all persons and must not be near or con-

nected to any other antenna or transmitter.

3. Select a user.

If more than one user is registered, you can switch

users in the iFit main screen. Press the increase

and decrease buttons next to the Enter button to

select a user.

4. Select an iFit workout.

To select an iFit workout, press one of the iFit but-

tons. Before some workouts will download, you

must add them to your schedule on www.iFit.com.

Press the iFit button to download the next workout

in your schedule. Press the Map button, the Train

button, or the Lose Wt. button to download the next

workout of that type in your schedule. Press the

Compete button to compete in a race that you have

previously scheduled. Press the Track button to re-

run a recent workout.

For more information about

the iFit workouts, please see www.iFit.com.

Note: If there are no workouts of the selected type

in your schedule, the next workout in your schedule

will be downloaded.

When you select an iFit workout, the display will

show the duration of the workout, the distance you

will walk or run, and the approximate number of

calories you will burn. The display may also show

the name of the workout. If you select a competi-

tion workout, the display will count down to the

beginning of the race.

Note: Each iFit button can also run two demo work-

outs. To use the demo workouts, remove the iFit

module from the console and press one of the iFit

buttons.

Содержание T 13.5









































Результаты поиска

Содержание T 13.5

Отзывы:

Похожие инструкции для T 13.5

Бренды по названию

Популярные бренды

NordicTrack T 13.5, Руководство пользователя

Результаты поиска

Содержание T 13.5

Отзывы:

Похожие инструкции для T 13.5

Бренды по названию

Популярные бренды