NordicTrack NTL99115.1, Руководство пользователя, Страница: 10 / 32

10
5. Set the console assembly (A) face down on a
soft surface to avoid scratching the console.
Next, lay the Desk Frame (77) onto the con-
sole assembly (A) as you insert the 24" Ground
Wire (96), the Console Wire (97), and the post
(B) through the hole (C) in the Desk Frame.
Note: It may help to turn the connector on the
Console Wire to a vertical position when you
insert it into the post.
Note: If the 1" Plastic Bushing (90) comes out,
press it back in.
See the inset drawing. Slightly twist and slide
the 1" Ring (5) down onto the post (B). Make
sure that the Ring is securely inserted into the
grooves in the post. Then, connect the two
Ground Wires (95, 96).
A
C
97
96
90
B
77
5
5
96
B
6. With the help of a second person, set the right
side of the desk assembly (D) onto the Inner
Right Upright (65).
Make sure not to pinch any
wires on the left side.
Partially tighten two 3/8" x 1 1/2" Screws (3) with
two 3/8" Washers (2) into the desk assembly (D)
as shown.
Note: Make sure that the bracket
on top of the Inner Right Upright (65) slides
between the Desk Support Frame Cover (87)
and Desk Support Frame (88). Do not fully
tighten the Screws yet.
3
3
87
88
2
65
D
6
95