NordicTrack NTL17010.0 Скачать руководство пользователя страница 30

Страница: 30 / 40

TROUBLESHOOTING

Most treadmill problems can be solved by following the simple steps below. Find the symptom that

applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.

PROBLEM: The power does not turn on

SOLUTION:

a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 14). Use only a single-outlet surge suppres-

sor that meets all of the specifications described on page 14.

IMPORTANT: The treadmill is not

compatible with GFCI-equipped outlets and may not be compatible with AFCI-equipped

outlets.

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the power switch located on the treadmill

frame near the power cord. If the switch protrudes

as shown, the switch has tripped. To reset the

switch, wait for five minutes and then press the

switch back in.

PROBLEM: The power turns off during use

SOLUTION:

a. Check the power switch (see the drawing above). If the switch has tripped, wait for five minutes

and then press the switch back in.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for

five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key into the console.

d. If the treadmill still will not run, please see the front cover of this manual.

PROBLEM: The console displays remain lit when you remove the key from the console

SOLUTION:

a. The console features a display demo mode, designed to be used if the treadmill is displayed in a

store. If the screen shows a preset presentation when you remove the key, the demo mode is

turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the dis-

plays are still lit, see step 6 on page 25 to turn off the demo mode.

PROBLEM: The displays of the console do not function properly

SOLUTION:

a. Remove the key from the console and

UNPLUG

THE POWER CORD.

Place the treadmill in the

storage position (see HOW TO FOLD THE TREAD-

MILL on page 29).

Next, remove the two indicated #8 x 3/4" Screws

(1).

Tripped

Reset

Содержание NTL17010.0









































Результаты поиска

Содержание NTL17010.0

Отзывы:

Похожие инструкции для NTL17010.0

Бренды по названию

Популярные бренды

NordicTrack NTL17010.0, Руководство пользователя

Результаты поиска

Содержание NTL17010.0

Отзывы:

Похожие инструкции для NTL17010.0

Бренды по названию

Популярные бренды