NordicTrack NTL15008.1 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 32

NordicTrack NTL15008.1 Скачать руководство пользователя страница 22

22

Locate the Reed Switch (49) and the Magnet (37) on

the left side of the Pulley (38). Turn the Pulley until the

Magnet is aligned with the Reed Switch.

Make sure

that the gap between the Magnet and the Reed

Switch is about 1/8 in. (3 mm).

If necessary, loosen

the #8 x 3/4" Clamp Screw (13), move the Reed

Switch slightly, and then retighten the Screw.

Reattach the Left Roller Cover (not shown) and run the

incline trainer for a few minutes to check for a correct

speed reading.

PROBLEM: The incline of the incline trainer does not change correctly

SOLUTION:

a. Hold down the Stop button and the Speed increase button, insert the key into the console, and

then release the Stop button and the Speed increase button. Press the Stop button again. Then,

press the Incline increase or decrease button. The incline trainer will automatically rise to the

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

If the incline does not calibrate, press the Stop button, and then press the Incline increase or de-

crease button again. When the incline is calibrated, remove the key from the console.

PROBLEM: The walking belt slows when walked on

SOLUTION:

a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 12.

b. If the walking belt is overtightened, incline trainer per-

formance may decrease and the walking belt may be-

come damaged. Remove the key and

UNPLUG THE

POWER CORD.

Using the hex key, turn both idler

roller bolts counterclockwise, 1/4 of a turn. When the

walking belt is properly tightened, you should be able

to lift each edge of the walking belt 3 to 4 in. (7 to 10

cm) off the walking platform. Be careful to keep the

walking belt centered. Then, plug in the power cord,

insert the key, and run the incline trainer for a few

minutes. Repeat until the walking belt is properly

tightened.

c. If the walking belt still slows when walked on, please see the front cover of this manual.

38

1/8 in.

37

3–4 in.

b

Idler Roller Bolts

Top

View

49

13

«
...
20
21
22
23
24
...
»

Содержание NTL15008.1

































Отзывы:

Нет отзывов