11
10. With the help of a second person, hold the con-
sole assembly near the Right Handrail (79) and
the Left Handrail (not shown).
Connect the Upright Wire (85) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN YOU TURN ON THE
POWER.
Remove the wire tie from the Upright
Wire.
Console
Assembly
10
Console
Wire
Wire
Tie
79
85
85
Console
Wire
9. Hold the Right Handrail (79) near the Right
Upright (83). Insert the Upright Wire (85)
through the Right Handrail as shown. Next, re-
move the tie from the bracket on the Right
Handrail. If necessary, press the Cage Nut (27)
back into place.
Set the Right Handrail (79) onto the top of the
Right Upright (83).
Start two 5/16" x 3/4" Patch Bolts (5) and two
5/16" Star Washers (9) into the Right Upright
(83) and the Right Handrail (79). Then, start a
5/16" x 1 1/2" Patch Bolt (4).
Tighten all three
Patch Bolts. Be careful not to pinch the
Upright Wire (85).
79
9
5
4
83
85
9
Tie
27