8
5
6
3
6
40
4
5. Tip: Avoid pinching the wires. Insert the
Handlebar Post (16) into the Frame (51).
Tip: Have a second person hold the Front
Handlebar Cover (9) and the Front Shield
Cover (20) out of the way.
Attach the Handlebar Post (16) with six
M8 x 20mm Screws (19), six M8 Split Washers
(18), and six M8 Washers (17); do not fully
tighten the Screws yet.
Then, slide the Front Handlebar Cover (9) and
the Front Shield Cover (20) downward; do not
press the Front Shield Cover into place yet.
Avoid pinching
the wires
Avoid pinching
the Pulse Wire (4)
19
19
19
18
18
18
17
17
17
51
20
16
9
6. Identify the Handlebar (3) and the Console Plate
(6), and orient them as shown.
Locate the Pulse Wire (4) inside the Handlebar
(3) and route it through the Handlebar and the
Console Plate (6) as shown.
Tip: Avoid pinching the Pulse Wire (4). Attach
the Console Plate (6) to the Handlebar (3)
with four M5 x 8mm Screws (40); start all the
Screws, and then tighten them.
