manualshive.com logo in svg

NordicTrack NTIVEL69016.0, Руководство пользователя

Поделиться
Скачать
NordicTrack NTIVEL69016.0 Скачать руководство пользователя страница 13

13

17. Identify the Rear and Front Upright Covers 

(3, 16), and orient them as shown.

  Press the Rear and Front Upright Covers (3, 16) 

together around the Upright (2). Then, attach 

them with an M5 x 15mm Machine Screw (55) 

and four M4 x 20mm Screws (50); start all the 

Screws, and then tighten them.

50

16

55

3

2

17

18. Identify a Front Leg Cover (20) and a Rear Leg 

Cover (21), and orient them as shown.

  Press the Front and Rear Leg Covers (20, 21) 

together around the right Upper Body Leg 

(6). Then, attach them with an M4 x 20mm 

Screw (50).

  Repeat this step for the left Upper Body 

Leg (6).

20

6

6

21

50

18

19

20. Make sure that all parts are properly tightened before you use the elliptical. Extra parts may be included. 

Place a mat beneath the elliptical to protect the floor. 

19. Plug the Power Adapter (31) into the Receptacle 

(33) on the rear of the elliptical.

  Note: To plug the Power Adapter (31) into an 

outlet, see HOW TO PLUG IN THE POWER 

ADAPTER on page 14.

31

33

Содержание NTIVEL69016.0





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды