background image

26

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the 

reed switch should be adjusted. To adjust the reed 

switch, first unplug the power cord.

Next, use a stan-

dard screwdriver 

and pry the Outer 

Disc (20) off 

the Right Outer 

Shield (23).

Locate the Reed Switch (56). Turn the Pulley (73) until 

a Magnet (137) is aligned with the Reed Switch. 

Next, remove the two M4 x 16mm Screws (98), 

and then remove the Reed Switch Bracket (54). 

Then, slightly loosen the two M4 x 10mm Clamp 

Screws (126).

Then, reattach the Reed Switch Bracket (54) and slide 

the Reed Switch (56) slightly closer to or away from 

the Magnet (137). Plug in the power cord and rock the 

Pulley (73) forward and backward so that the Magnet 

passes the Reed Switch repeatedly. Repeat these 

actions until the console displays correct feedback. 

When the reed switch is correctly adjusted, remove 

the Reed Switch Bracket (54), retighten the two 

M4 x 10mm Clamp Screws (126), and reattach the 

Reed Switch Bracket.

Then, reattach the outer disc to the right outer shield 

and plug in the power cord.

23

20

98

54

126

73

137

56

Содержание NTEVEL19016.0

































Отзывы: