13
13
85
F
86
14
79
86
87
14
14
13. Identify the Right Handrail Cover (85). Set the
Right Handrail Cover on the right Handrail (86).
Start two #8 x 3/4" Truss Head Screws (14) into
the bottom of the Right Handrail Cover; do not
fully tighten the Truss Head Screws.
Next, slide the Right Handrail Cover (85) for-
ward until it rests against the console assembly
(F). Then, tighten the two #8 x 3/4" Truss Head
Screws (14); do not overtighten the Truss
Head Screws.
Then, attach the Right Bottom Handrail Cover
(88) with two 8 x 3/4" Truss Head Screws (14).
Attach the Left Handrail Cover (79) and the
Left Bottom Handrail Cover (87) in the same
way.
88
14
14. Note: If the treadmill is assembled on a
smooth surface, it may roll forward during
this step.
Raise the Frame (56) to the upright position.
IMPORTANT: Do not raise the Frame past the
vertical position. Have a second person hold
the Frame until step 16 is completed.
Remove the two 5/16" x 3/4" Screws (4) from the
Latch Crossbar (41).
Orient the Latch Crossbar (41) as shown. Make
sure that the “This side toward belt” sticker
(K) is facing the treadmill. Attach the Latch
Crossbar to the brackets on the Frame (56) with
the two 5/16" x 3/4" Screws (4) and two 5/16"
Star Washers (11).
56
41 K
11
11
4
4
Brackets
14
