NordicTrack Elite 11.0 NTEVEL99915.0, Руководство пользователя, Страница: 14 / 40

14
17. Orient the Rear Console Cover (80) as shown.
Attach the Rear Console Cover (80) to the
Upright (4) with two M4 x 16mm Screws (101).
Orient the Front Console Cover (79) as shown.
Attach the Front Console Cover (79) around the
Upright (4) by pressing it onto the Rear Console
Cover (80).
79
4
80
101
17
18
19. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be
included. Place a mat beneath the elliptical to protect the floor.
18. IMPORTANT: If you purchased the optional
iFit module, insert the iFit module into the
iFit port on the Console (7) before you attach
the Tablet Holder (127). After the elliptical is
assembled, follow the instructions included
with the iFit module.
Attach the Tablet Holder (127) to the back of the
Console (7) with four #8 x 12mm Screws (111);
start all the Screws, and then tighten them.
7
127
111
iFit
Port