8
5. Apply a coat of the included grease to the
Upright Axle (48) and to two Wave Washers
(118).
Tip: Avoid damaging the Wire Harness (60).
Insert the Upright Axle (48) through the Upright
(5) and center it. Slide a Wave Washer (118)
onto each side of the Upright Axle.
6. Identify the Right and Left Upper Body Legs (6,
7), which are marked with “Right” and “Left”
stickers, and orient them as shown.
Slide the Right and Left Upper Body Legs (6, 7)
onto the right and left sides of the Upright Axle
(48).
Using two hex keys, tighten an M8 x 16mm
Patch Screw (102) and an M8 Washer (95) into
each end of the Upright Axle (48) at the same
time.
5
Avoid damaging the
Wire Harness (60)
Grease
Grease
5
118
48
60
118
6
95
7
102
95
102
48
6
