20
HOW TO USE A PRESET WORKOUT
1. Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2. Select a preset workout.
To select a preset workout, press the 16 Calorie
Workouts or the 16 Performance button repeatedly
until the desired workout appears in the display.
When you select a preset workout, the display will
show the duration of the workout and the name of
the workout. A profile of the speed settings of the
workout will appear in the matrix.
The display will also show the maximum pedaling
speed and the maximum resistance level.
3. Begin pedaling to start the workout.
Each workout is divided into one-minute segments.
One resistance level and one target speed are
programmed for each segment. Note: The same
resistance level and/or target speed may be pro-
grammed for consecutive segments.
The resistance level and the target speed for the
first segment will appear in the matrix.
During
the work-
out, the
profile on
the speed
tab will
show your
progress.
The flash-
ing segment of the profile represents the current
segment of the workout. The height of the flashing
segment indicates the target speed for the current
segment.
At the end of each segment of the workout, a
series of tones will sound and the next segment
of the profile will begin to flash. If a different
resistance level and/or target speed is programmed
for the next segment, the resistance level and/or
target speed will appear in the display for a few
seconds to alert you. The resistance of the pedals
will then change.
As you exercise, you will be prompted to keep
your pedaling speed near the target speed for the
current segment. When an upward-pointing arrow
appears in the display, increase your speed. When
a downward-pointing arrow appears, decrease
your speed. When no arrow appears, maintain
your current speed.
IMPORTANT: The target speed is intended only
to provide motivation. Your actual pedaling
speed may be slower than the target speed.
Make sure to pedal at a speed that is comfort-
able for you.
If the resistance level for the current segment is
too high or too low, you can manually override
the setting by pressing the Resistance buttons
IMPORTANT:
When the current segment of the
workout ends, the pedals will automatically
adjust to the resistance level programmed for
the next segment.
The workout will continue in this way until the last
segment ends. To stop the workout at any time,
stop pedaling. The time will flash in the display. To
resume the workout, simply resume pedaling.
4. Follow your progress with the display.
See step 4 on page 18.
5. Measure your heart rate if desired.
See step 5 on page 19.
6. Turn on the fan if desired.
See step 6 on page 19.
7. When you are finished exercising, the console
will turn off automatically.
See step 7 on page 19.
Profile
Содержание COMMERCIAL VR
Страница 4: ...4 ...
Страница 5: ...5 all STANDARD SERVICE PLANS ...
