NordicTrack C 970 Pro Treadmill, Руководство пользователя

Страница: 23 / 40

23
To measure your heart rate, stand on the foot
rails and hold the pulse bar with your palms on
the metal contacts; avoid moving your hands.
When your pulse is detected, your heart rate will be
shown.
For the most accurate heart rate read-
ing, continue to hold the contacts for about 15
seconds.
8. Turn on the fan if desired.
The fan features multiple
speed settings and an auto
mode. When the auto mode
is selected, the speed of the
fan will automatically increase
and decrease as the speed of the walking belt
increases and decreases.
Press the fan buttons repeatedly to select a fan
speed or the auto mode, or to turn off the fan.
9. When you are fi nished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to zero. The
incline must be at zero or you may damage the
treadmill when you fold it to the storage posi-
tion.
Next, remove the key from the console and
put it in a secure place.
When you are fi nished using the treadmill, press
the power switch into the off position and unplug
the power cord.
IMPORTANT: If you do not do
this, the treadmill’s electrical components may
wear prematurely.
HOW TO USE AN ONBOARD WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 21.
2. Enter your weight.
See step 3 on page 21.
3. Select an onboard workout.
To select an onboard workout, press the Incline
button, the Intensity button, or the Speed button
repeatedly until the desired workout appears in the
display.
When you select an onboard workout, the display
will show the duration of the workout.
4. Start the workout.
Press the Start button. A moment after you press
the button, the treadmill will automatically adjust to
the
fi rst speed and incline settings of the workout.
Hold the handrails and begin walking.
Each workout is divided into segments. One speed
setting and one incline setting are programmed for
each segment. Note: The same speed setting and/
or incline setting may be programmed for consecu-
tive segments.
If the speed or incline setting is too high or too low
at any time during the workout, you can manu-
ally override the setting by pressing the Speed or
Incline buttons;
however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button. To resume the workout, press the Start but-
ton. The walking belt will begin to move at 1 mph.
When the next segment of the workout begins, the
treadmill will automatically adjust to the speed and
incline settings for the next segment.