NordicTrack A2350 Pro Treadmill Скачать руководство пользователя

Страница: 16 / 32

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to

cold temperatures, allow it to warm to room tem-

perature before turning on the power. If you do not

do this, you may damage the console displays or

other electrical components.

Plug in the power cord

(see page 14). Next, lo-

cate the reset/off circuit

breaker on the treadmill

frame near the power

cord. Make sure that the

circuit breaker is in the

reset position.

IMPORTANT: The console features a display demo

mode, designed to be used if the treadmill is dis-

played in a store. If the displays light as soon as

you plug in the power cord and switch the reset/off

circuit breaker to the “reset” position, the demo

mode is turned on. To turn off the demo mode,

hold down the Stop button for a few seconds. If the

displays remain lit, see THE INFORMATION MODE

on page 19 to turn off the demo mode.

Next, stand on the foot

rails of the treadmill.

Locate the clip attached to

the key (see the drawing

at the right), and slide the

clip securely onto the

waistband of your clothes.

Then, insert the key into

the console. After a moment, the displays will light.

IM-

PORTANT: In an emergency situation, the key can

be pulled from the console, causing the walking

belt to slow to a stop. Test the clip by carefully tak-

ing a few steps backward; if the key is not pulled

from the console, adjust the position of the clip.

HOW TO USE THE MANUAL MODE

1. Insert the key into the console.

See HOW TO TURN ON THE POWER at the left.

2. Select the manual mode.

Each time the key is in-

serted, the main menu

will appear. To select the

manual mode, use the

increase and decrease

buttons next to the Enter

button and highlight

START. Press the Enter button. If you have se-

lected a workout or the iFit training mode, press

the Menu button to return to the main menu.

3. Start the walking belt and adjust the speed.

To start the walking belt, press the Start button, the

Speed increase button, or one of the numbered

speed buttons.

If you press the Start button or the Speed increase

button, the walking belt will begin to move at 1

mph. As you exercise, change the speed of the

walking belt as desired by pressing the Speed in-

crease and decrease buttons. Each time you press

one of the buttons, the speed setting will change

by 0.1 mph; if you hold down the button, the speed

setting will change in increments of 0.5 mph.

If you press one of the numbered speed buttons,

the walking belt will gradually change speed until it

reaches the selected speed setting. To select a

speed setting that includes a decimal—such as 3.5

mph—press two numbered buttons in succession.

For example, to select a speed setting of 3.5 mph,

press the 3 button and then immediately press the

5 button.

To stop the walking belt, press the Stop button. To

restart the walking belt, press the Start button, the

Speed increase button, or one of the numbered

speed buttons.

Key

Reset

Clip

Содержание A2350 Pro Treadmill

































Результаты поиска

Содержание A2350 Pro Treadmill

Отзывы:

Похожие инструкции для A2350 Pro Treadmill

Бренды по названию

Популярные бренды

NordicTrack A2350 Pro Treadmill, Руководство пользователя

Результаты поиска

Содержание A2350 Pro Treadmill

Отзывы:

Похожие инструкции для A2350 Pro Treadmill

Бренды по названию

Популярные бренды