NordicTrack A2350 Pro Treadmill страница 23 Скачать руководство пользователя

Страница: 23 / 32

Remove the three #8 x 3/4" Screws (1) and care-

fully pivot the Motor Hood (62) off.

Locate the Reed Switch (73) and the Magnet (47)

on the left side of the Pulley (48). Turn the Pulley

until the Magnet is aligned with the Reed Switch.

Make sure that the gap between the Magnet and

the Reed Switch is about 1/8 in. (3 mm).

If nec-

essary, loosen the #8 x 3/4" Clamp Screw (17),

move the Reed Switch slightly, and then retighten

the Screw. Reattach the Motor Hood (not shown).

Reattach the Hood Screws (not shown) if neces-

sary. Run the treadmill for a few minutes to check

for a correct speed reading.

PROBLEM: The incline of the treadmill does not change correctly

SOLUTION:

a. Hold down the Stop button and the Speed increase button, insert the key into the console, and

then release the Stop button and the Speed increase button. Press the Stop button and then

press the Incline increase or decrease button. The treadmill will automatically rise to the maxi-

mum incline level and then return to the minimum level. This will recalibrate the incline system. If the

incline does not calibrate, press the Stop button again, and then press the Incline increase or de-

crease button again. When the incline is calibrated, remove the key from the console.

PROBLEM: The walking belt slows when walked on

SOLUTION:

a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 14.

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be-

come damaged. Remove the key and

UNPLUG

THE POWER CORD.

Using the hex key, turn both

idler roller bolts counterclockwise, 1/4 of a turn.

When the walking belt is properly tightened, you

should be able to lift each edge of the walking belt

2 to 3 in. (5 to 7 cm) off the walking platform. Be

careful to keep the walking belt centered. Then,

plug in the power cord, insert the key, and run the

treadmill for a few minutes. Repeat until the walking

belt is properly tightened.

c. If the walking belt still slows when walked on, see the front cover of this manual.

Top

View

1/8 in.

Idler Roller Bolts

2–3 in.

Содержание A2350 Pro Treadmill

































Результаты поиска

Содержание A2350 Pro Treadmill

Отзывы:

Похожие инструкции для A2350 Pro Treadmill

Бренды по названию

Популярные бренды

NordicTrack A2350 Pro Treadmill, Руководство пользователя

Результаты поиска

Содержание A2350 Pro Treadmill

Отзывы:

Похожие инструкции для A2350 Pro Treadmill

Бренды по названию

Популярные бренды