NordicTrack 831.24988.2 Скачать руководство пользователя страница 32

Страница: 32 / 40

SYMPTOM: The walking belt is off-center or slips

when walked on

If the walking belt is off-center,

first remove the

key and

UNPLUG THE POWER CORD.

If the

walking belt has shifted to the left,

use the hex

key to turn the left idler roller screw clockwise 1/2

of a turn;

if the walking belt has shifted to the

right,

turn the left idler roller screw counterclock-

wise 1/2 of a turn. Be careful not to overtighten the

walking belt.

Then, plug in the power cord, insert

the key, and run the treadmill for a few minutes.

Repeat until the walking belt is centered.

If the walking belt slips when walked on,

first

remove the key and

UNPLUG THE POWER

CORD.

Using the hex key, turn both idler roller

screws clockwise, 1/4 of a turn. When the walk-

ing belt is correctly tightened, you should be able

to lift each edge of the walking belt 2 to 3 in. (5 to

7 cm) off the walking platform. Be careful to keep

the walking belt centered. Then, plug in the power

cord, insert the key, and carefully walk on the

treadmill for a few minutes. Repeat until the walk-

ing belt is properly tightened.

SYMPTOM: The console display has lines running

through it

a. If lines appear in the console display, see THE

SETTINGS MODE on page 28 and adjust the con-

trast level of the display.

CLEANING

Regularly clean the treadmill and keep the walking

belt clean and dry. First,

press the power switch into

the off position and unplug the power cord.

Wipe

exterior parts of the treadmill with a damp cloth, and

a small amount of mild soap.

IMPORTANT: Do not

spray liquids directly onto the treadmill. To avoid

damage to the console, keep liquids away from the

console.

Then, thoroughly dry the treadmill with a soft

towel.

Содержание 831.24988.2









































Результаты поиска

Содержание 831.24988.2

Отзывы:

Похожие инструкции для 831.24988.2

Бренды по названию

Популярные бренды

NordicTrack 831.24988.2, Руководство пользователя

Результаты поиска

Содержание 831.24988.2

Отзывы:

Похожие инструкции для 831.24988.2

Бренды по названию

Популярные бренды