17
17. Tighten a #8 x 3/4" Screw (2) into each Inside
Upright Cover (88, not shown) as shown.
Do not
overtighten the Screws.
Carefully slide the Upright Crossbar (41)
between the Uprights (89, 90). Attach the Upright
Crossbar with the four 5/16" x 3/4" Screws (4)
that you removed in step 6 and four 5/16" Star
Washers (11) (only one side is shown).
Start all
four Screws, and then tighten them.
17
89
4
11
41
90
16
16. Tighten a #8 x 1" Screw (103) with a Handrail
Plate (105) and a #10 Washer (104) into the Left
Outside Upright Cover (87) and into the bottom
of the left handrail assembly (D).
Make sure to
orient the Handrail Plate as shown. Do not
overtighten the Screw.
Press the Left Inside Upright Cover (88) against
the Left Outside Upright Cover (87) until they
snap together.
Repeat this step above on the other side of
the treadmill with the Right Outside Upright
Cover (96) and the Right Inside Upright Cover
(95).
105
D 87
95
96
103
104
88
104
105
103
2
2
88
Содержание 831.24988.2
Страница 5: ...5 ...
Страница 6: ...6 all STANDARD SERVICE PLANS ...