10
9
9. Attach the Seat (9) to the Seat Carriage (3) with
four M6 x 38mm Patch Screws (81) and four
M6 Washers (44) (only two of each are shown).
Note: The Patch Screws and Washers may
be preattached to the underside of the Seat.
9
44
81
44
3
10. Plug the Game/Pulse Wire (58) into the
Game/Pulse Receptacle (79) located in the Left
Shield (26).
10
58
26
79
11. Identify the Right Pedal (21), which is marked
with an “R.” Using an adjustable wrench,
firmly
tighten
the Right Pedal
clockwise
into the Right
Crank (23). Tighten the Left Pedal (not shown)
counterclockwise
into the Left Crank (not
shown).
IMPORTANT: Tighten both Pedals as
firmly as possible. After using the exercise
cycle for one week, retighten the Pedals.
Adjust the strap on the Right Pedal (21) to the
desired position, and press the ends of the
strap onto the tabs on the Right Pedal.
Adjust
the strap on the Left Pedal (not shown) in
the same way.
11
12.
Make sure that all parts are properly tightened before you use the exercise cycle.
Note: After assembly
is completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
21
23
Strap
Tab
