12
11. IMPORTANT: To avoid damaging the Pulse
Crossbar (81), do not use power tools and
do not overtighten the #10 x 3/4" Screws (4).
Orient the Pulse Crossbar (81) as shown. Attach
the Pulse Crossbar to the handrail assemblies
(C, E) with four #10 x 3/4" Screws (4) and four
#10 Star Washers (5). Start all four Screws,
and then tighten them.
Make sure that the Upright Wire (91) isn’t
pinched. Firmly tighten the four 5/16" x 2 3/4"
Screws (12).
11
4
4
5
5
12
12
C
81
E
91
12. With the help of a second person, hold the con-
sole assembly near the left handrail assembly
(C) and the right handrail assembly (not shown).
Connect the ground wire from the console as-
sembly to the Ground Wire (80) on the Pulse
Crossbar (81).
Connect the Upright Wire (91) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
12
Console
Assembly
91
91
Wire
Tie
Console
Wire
Console
Wire
C
80
Ground
Wire
81
