Nordica WIND AIR, Инструкция по эксплуатации

Страница: 24 / 84

A
A
A
B
D
C
ENGLISH
- if present, remove the cast-iron rings and/or the sheet-metal
perforated panels A from the outlets where the air ducting pipes
are to be connected;
- secure the supplied galvanised fittings B to the product cover, at
the outputs to be channelled;
- secure the ducting pipes C to the galvanised fittings B using the
supplied hose clamps D ;
- in the case of channelling a product with four upper outputs , it
is advisable to
use the front ones
(see example
A
in the figure)
where most of the heat accumulates;
- bend the two ends of the galvanized support brackets 90°,
where the motor unit of the Wind Air kit will be fixed;
If the product is supplied with CARTER CLOSED ON THE
BOTTOM SIDE
Remove ALL the knockouts located on the bottom side
of the carter to facilitate the air circulation.

24