Nordic SG-L0118 Скачать руководство пользователя страница 5

5

NORDIC

•  Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators and other polymer 

components may be damaged resulting in electrolyte leakage and/or internal short circuiting leading to heat 
generation causing rupture or file. Moreover do not dispose of the batteries in fire, explosion and/or intense burning 
may result.

•  Under extreme conditions, battery leakage may occur. When you notice liquid on the battery, proceed as follows:

•  Carefully wipe the liquid off using a cloth. Avoid skin contact.

•  In case of skin or eye contact, follow the instructions below:

1. 

Immediately rinse with water. Neutralize with a mild acid such as lemon juice or vinegar.

2. 

In case of eye contact, rinse abundantly with clean water for at least 10 minutes.

3. 

Consult a physician.

Fire hazard! Avoid short-circuiting the contacts of a detached battery. Do not incinerate the battery.

CHARGERS

•  Never attempt to charge non-rechargeable batteries.

•  Have defective cords replaced immediately.

•  Do not expose to water.

•  Do not open the charger.

•  Do not probe the charger.

•  The charger is intended for indoor use only.

SYMBOLS

In this manual and/or on the machine the following symbols are used:

Denotes risk of personal injury or damage to the tool.

Read manual before use

Wear eye protection

Wear ear protection

Wear safety gloves

Содержание SG-L0118













Отзывы: